How To Remove Dents From Hardwood Floors

Every bit I take said many times before sanding hardwood floors by hand can be a lot of hard work. Hard work that can be alleviated with the use of a floor sander.

With that said, I have at present spoken to style too many people that will be sanding their floors past manus no affair what. And so it is only right that I do an commodity near sanding wood floors with mitt sanders.

How to sand a hardwood floor by mitt? The exact same style you would with floor sanding machines, only with a lot more than elbow grease! Start with a depression grit like twoscore, climb to 60, 80 and so 100. Use a handheld orbital sander, ideally with a gear-driven setting.

When it comes to this topic, the most important matter to talk over isefficiency. Some manus sanders are far more powerful and effective than others and it'south important that you requite yourself a head showtime.

Y'all don't want to be defenseless brusk… There are some hand sanding tools that volition accept yous sanding fifty-fifty a small-scale area, for an eternity!

Which mitt sander is the best?

To add a little pizzazz to this article I'thou going to rank them in club of aggressiveness and efficiency.

Before I first I need to warn you lot, I am going to sound a petty negative almost the tools you are probably going to utilise if yous are going to sand your floors past hand. I'yard not trying to rain on your parade or be mean, I am just trying to exist honest. If you plan on sanding wood floors with mitt sanders, information technology is going to be very tiring and time consuming. Forewarned is forearmed!

5. In terminal place is none other than the delta sander.

detailer-2 I wasn't even going to include this sander in my groovy list, only it is a handheld sander. It is used by professionals to sand right into the corners where the edge sander can't reach.

Other pocket-size item piece of work aside, this sander is pretty much useless. It has no power whatsoever, and it doesn't produce a good terminate (polish surface).

You will demand this for sanding the corners, but if you actually are on a budget, you tin can rub corners downward, literally, by hand (and sandpaper of class).

4. Dragging its heels, in fourth place, we have the handheld random orbital sander!

hand held random orbital sander It's true I'm deplorable to say the random orbital sander yous take in your garage is just non going to cut it.

This tool is neat for creating a smooth terminate on wood, specially in small areas. The random orbital system ways that the pad oscillates, but it spins loosely meaning it volition e'er give mode to resistance.

That is what it was designed for, not to remove massive amounts of woods, but to massage it smooth.

Yeah y'all can put a forty dust on it and 'crude upwardly' some small areas, but if you program on sanding your wood floors by mitt with this sander then you had amend articulate your calendar.

3. Taking third identify, the palm sander.

The about common of all. The palm sander.

Just like the handheld random orbital, palm sanders oscillate, but the palm sander plate is stock-still straight. Without this 'give' the palm sander can be a little more aggressive, while still producing quite a smooth cease.

Palm sanders also accept the added benefit of having a foursquare border that can exist used to sand right into the corners of the floor.

The trouble is with this sander is that it even so doesn't cut the mustard in terms of power and aggressiveness.

Once again, if you choose to employ this sander, fix for a long hard slog.

ii. Not quite taking the summit spot, the handheld belt sander.

hand held belt sander Now we are talking, a automobile with some real grunt.

The handheld chugalug sander tin sand off one-time stop and sand out dents and scratches much more easily than the previous sanders.

While it won't keep up with the speed of a normal floor sander, the hand held chugalug sander will get the task moving forward with reasonable speed.

Just be sure to keep moving side to side, forward and backwards, and ideally, in a circular move. The more pressure you lot tin apply, the faster information technology will get the wood back to bare.

This tool is non great for getting right up to the edges. Y'all tin can get up close but on some sides of the room it will be going against the grain and producing a bad finish.

When used for sanding with the grain, this can produce a adequately smooth finish, but not the best.

1. Storming through in first identify, pole position, peak banana… The Festool Rotex!

festool rotex RO 150 I have been using the Festool Rotex (150mm disk) for years. I employ it for sanding stairs, thresholds and hard-to-get-to areas, equally well as, the edges of floors.

Not only does the Rotex have the ability to produce an extremely smooth stop with its random orbital setting, it tin can really get some work washed with the geared orbital setting (or as rotex say the "Rotex rotary movement").

This means the pad oscillates and it spins. Not just does it spin, it spins with force.

If I had to sand a floor by manus, this would be my tool of choice, without a doubtfulness.

Yous can remove old varnish and wood speedily, sand right up to the edge of the floor (autonomously from the corners) and produce a very high-quality stop.

Notwithstanding, I'm not certain if this can be rented and to purchase it knew is $550-600 (then another $500-700 if y'all desire a dust extractor).

UPDATE:Many people have been messaging me that they do actually want to purchase this, you lot can go it from Amazon by clicking hither (For United kingdom Peeps, click here). If y'all would similar to take a closer look, I have written a full Festool Rotex RO 150 review hither. Alternatively, at that place is a brusk buyer's guide at the lesser of this folio that contains some cheaper options. Here's a hot tip: Sometimes in the past when I haven't had the extractor, for whatever reason, I have just put the vacuum hose on the terminate and just taped information technology on with decorators tape. Don't tell anyone

Now a quick give-and-take on technique…

Hopefully, you know by now, that as with all sanding machines, they should not sit still for too long!

That is, if you want to create a smoothen flat cease. The less ambitious the tool the less important, but even with random orbitals and palm sanders moving it back and forrad will be more effective than sitting information technology nevertheless. So in that location is no reason not to proceed moving!

If you lot use anything finer than 40 grit to kickoff you are not going to succeed. Y'all need to utilize a coarse dust to remove varnish, dirt, scuffs, dents and scratches.

Then climb the grits as you would exercise sanding anything else. Skipping from 40g to 100g is going to give you lot a scratchy stop.

Make sure that the quondam varnish is properly removed. If you run into a spot that looks like information technology could still have varnish on information technology, just lick your finger and rub it. The wood will soak and darken and the varnish won't.

If your floor is very uneven, deeply dented or has several layers of hard shine, and then I suggest refinishing your hardwood floors properly.

Other than that folks, sanding hardwood floors past mitt is pretty unproblematic.

If y'all are just near to beginning a project and so I wish y'all expert luck, it can be washed and has been done many times by readers of this website.

Equally I often say, yous will be refinishing your flooring for a short period, merely you lot volition be seeing the results, every single day. Get in worth information technology!

[tabular array id=1 /]