How To Remove Pex Fitting

When done correctly, it's possible to reuse PEX fittings after the copper crimp rings have been removed. Knowing how to remove copper crimp rings may look difficult at kickoff but with the right tools and steps, it's easier and then expected. Not simply is this helpful for existing systems, it can be used for new connections every bit well.

In this blog, we will cover two unlike options to remove copper crimp rings from PEX fittings. Included are Choice #1using a band removal tool and Choice #two u sing common tools if you lot practice non have the specialized tool. For instructions on how to install a copper crimp ring, click hither.

Tools Required

Pipage Cutter
Pliers
Crimp Band Removal Tool
If you do not have a crimp ring removal tool yous volition demand a f lat head screwdriver , h acksaw or d remel or mini grinder with a cutting off disc .

Getting Started

Removing the copper crimp rings requires a bit of effort and care must be taken to ensure the fitting is non damaged if it is going to be reused.

When a ring needs to exist removed from fittings, within a system, in hard to access locations t he use of a ring cutt ing tool makes the job easier. Band removal is easie st if the fitting can be removed from the pipage system and clamped in a vice , it is important to avert clamp ing on the inser t ribs or barbed area which will harm the fi t t i ng m aking information technology unusable.

Pick #one - R emoving Copper Crimp Ring using Ring Removal Tool

Footstep #1

Cut the fitting assembly from the tubing using a piping cutter . The c ut should be close to the fitting .

Footstep #2

Depending on the brand of tool yous have you may have to a d merely the tool setting to the appropriat e size of crimp band . Follow the instructions provided by the tool manufacturer. Some band removal tools are non-adjustable.

Footstep # three

Insert the minor jaw inside plumbing fixtures and close the handles . It requires a little mitt strength to clasp it then that it cuts right through the copper ring. Exist conscientious not to cut right through the PEX pipe damaging the fitting. A damaged plumbing equipment must not be reused .

Pace #4

Rotate the tool 120° - 180° to the uncut portion of the crimp ring and close the tool enough to cause the ring to open up . If needed, rotate the tool 90° and echo until the crimp ring will slide off.

Step # five

Eastward xpand the PEX pipage by r eastward-insert ing the tool into the fitting and fully clos ing the handles to pinch and expand the tubing , r otate the tool in the plumbing fixtures and repeat every 45° to sixty° around the PEX tubing until it can exist removed.

Step #half-dozen

If you are having difficulty removing the pipe , yard rip the pipage with a pliers and pul 50 off with a twisting motion.

Option #2 - R emoving Copper C rimp Ring using Common T ools

Step #one

Cut through the c rimp r ing perpendicular to the pipe. G ake sure that you do not cut through the PEX pipe making contact with the plumbing equipment. Any damage to the fitting wil fifty render it unsuitable for reuse. Various tools can be used , if in that location is room a hacksaw will work and if infinite is express a Dremel with cut off disc works well .

Step #2

Remove the Crimp Ring , you can apply a flat head screwdriver and place it in the cut and twist to open the crimp ring. And so use pliers to curve the ring open and remove information technology , or you can slide it off the pipe if the pipe end is not continued.

Step #3

remove pex tube from fitting with screw driver Remove the PEX Pipe . The barbs on the PEX fitting s make removing the pipe difficult , grip on the PE X pipe with a pliers , and with a twisting motility remove the pipe from the fitting. You may need to cutting part mode through the pipe in order to get the pipe to come up off, great care must exist taken to not cut right through and damage the plumbing fixtures.

Even though the crimp rings tin't exist used again, the fittings can be when removal is done correctly and the plumbing fixtures is in expert shape. And then earlier throwing the whole plumbing fixtures away, consider following these steps to remove the copper crimp band and reuse the fitting.